Menu
LED displays make it possible to show up-to-date information, wayfinding, operational notices and visual content in locations where large numbers of people gather.
Trefyr provides permanent LED displays for municipalities, public authorities, public transport, properties, healthcare environments, arenas and other public operations. Each solution is adapted to the location, viewing distance, lighting conditions and how the information will be used.
We help with the complete solution, from display selection and technical planning to supporting structures, installation, content management and long-term service.
Display welcome messages, wayfinding, opening hours, queue information and other current notices for visitors.
Suitable for public authorities, municipal buildings, hospitals, commercial properties and larger corporate entrances.
Communicate departures, changes, wayfinding and other information in locations where large numbers of people move.
The display surface is specified to remain clear at the required viewing distance and under the location’s actual lighting conditions.
Display event information, match graphics, sponsors, wayfinding and other visual content in foyers, entrances and public areas.
The same installation can be used for multiple events and adapted to the activities taking place each day.
The most suitable display solution depends on where it will be installed, how close people will be and what type of information will be shown.
A high-resolution LED video wall may be suitable for an entrance or foyer, while a high-brightness outdoor display may be required for a façade, entrance road or larger public area.
A large, continuous display surface for entrances, foyers, waiting areas and other indoor environments.
A finer pixel pitch provides clear text, graphics and video even when visitors are close to the display.
High-brightness, weather-resistant LED displays for façades, entrance roads, arenas and other outdoor environments.
The solution is adapted to the viewing distance, sunlight, location, supporting structure and local conditions.
Professional displays are suitable for smaller information areas, wayfinding, menus, queue information and recurring communication.
Several displays can be connected to the same system and managed centrally.
The LED display can be integrated into a wall, recess or custom-built structure to become a natural part of the environment.
The display surface can also be built in wide, vertical or other formats that follow the architecture of the building.
The choice of display is based on the size of the image surface, viewing distance, lighting conditions, operating hours and how the installation will be integrated.
We work with both modular LED displays and professional signage displays and recommend a solution based on the actual requirements of the location.
The LED display can be connected to a computer, media player, presentation system or another video source.
For recurring information and digital signage, the installation can be complemented with a media player and CMS. This allows content to be updated and scheduled over the internet without staff needing to be present at the display.
Several displays and locations can be managed through the same system and show shared, local or time-controlled content.
Plan which content should be shown at different times, on specific days or during selected periods.
Update one or several displays from the same platform, regardless of where they are installed.
Combine displays, video processing and video sources into a control solution that is easy for the organisation to use.
1
We begin by reviewing the location, target audience and the type of information that will be shown.
We also consider visitor flows, viewing distances, lighting conditions, operating hours and how the display surface should be integrated into the environment.
2
Based on the location and intended use, we determine a suitable display size, pixel pitch, brightness and resolution.
The aim is to make the information clear without making the solution larger or more advanced than the location requires.
3
We plan the supporting structure, mounting, power supply, data cabling, signal flows, video processing and future service access.
For outdoor installations, we also consider weather conditions, ventilation, wind loads and the technical requirements of the location.
4
The display is installed, connected and configured together with media players, control systems and other video sources.
We configure the resolution, brightness, colours and content management according to the actual environment.
5
Once the installation is complete, we test the system and train the people who will operate it.
You also receive documentation and continued access to technical support, service and spare parts.
Frequently asked questions
The right solution depends on whether the display will be installed indoors or outdoors, the size of the display surface, the viewing distance and the type of information that will be shown.
For short indoor viewing distances, a high-resolution LED display with a finer pixel pitch is normally used. For larger surfaces and longer viewing distances, a coarser pixel pitch may provide a more cost-effective solution.
Text size, contrast, the amount of content, viewing distance and display brightness need to be planned together.
We specify the display surface according to the location and can also provide recommendations for resolution, content formats and suitable safety margins.
The display can be connected to a computer, media player, presentation system or another video source.
With a media player and CMS, the content can be updated, scheduled and managed centrally over the internet.
Yes. Several LED displays and professional signage displays can be connected to the same content management and control solution.
They can show the same information, locally adapted content or synchronised visual sequences depending on the organisation’s requirements.
Yes. Outdoor environments require displays with high brightness, weather protection and supporting structures adapted to the location.
We also plan the power supply, ventilation, service access, mounting and, when required, wind load calculations.
Planning permission or other permits may be required depending on the location, size and intended use of the display.
The requirements vary between locations and municipalities and should therefore be checked early in the project.
Yes. The LED display can be integrated into a recess, wall, façade or custom-built structure.
The installation is planned with suitable ventilation, mounting, cabling and service access.
Yes. We can provide the LED display, supporting structure, video processing, media players, signal management, control systems, installation, configuration and training.
When required, we can also coordinate the installation with property owners, architects, building contractors and other parties involved in the project.
The price is primarily determined by the size of the display surface, pixel pitch, brightness, supporting structure, video processing and how the display will be integrated.
Send us the dimensions of the location or a drawing, together with the approximate viewing distance and intended use. This is normally enough for an initial technical recommendation and budget estimate.
We help you develop a complete solution with an LED display, supporting structure, video processing, content management and installation.
Send us the dimensions of the location or a drawing, together with information about the viewing distance and the type of content that will be shown. This is normally enough for an initial recommendation and budget estimate.
